9
Section 4 - Adjusting the Headgear
3
4
2
1
> There are four headgear adjustments:
headgear top, tightness, angle
adjustment, and distance
adjustment.
1. Headgear Top
Adjusts headgear for proper depth on
the head to ensure correct balance
and stability.
2. Headgear Tightness
To adjust, push in the adjusting knob
located on the back of the headgear and
turn left or right to desired tightness.
> If adjustment is limited, it may
be necessary to remove the
comfort cushion.
3. Distance adjustment
Adjusts the distance between the face and
the lens. To adjust, loosen both outside
tension knobs and press inward to free
from adjustment slots. Move forward or
back to desired position and re-tighten.
(Both sides must be equally positioned
for proper vision).
4. Angle Adjustment
Four pins on the right side of the headband
top provide adjustment for the forward tilt
of the helmet. To adjust, loosen the right
outside tension adjustment knob then lift
on the control arm tab and move it to the
desired position. Re-tighten tension
adjustment knob.
> When using the back distance
adjustment positions, only the back
three angle adjustment pins can
be used.
Summary of Contents for BLUE FX
Page 19: ...17 Notes...
Page 20: ...welding com au 1300 300 884 235663 ISS 1 JAN 2017...