3 • System Setup
WHITESTAR SIGNATURE™ System
Rx Only – Z370147 Rev. C 1008
3-28
Figure 3.16 – Surgical Media Center Pop-up Window
2. Use the
Up
and
Down
arrows to adjust the settings.
Translucency
is used to
make the overlay (instrument settings) more or less opaque.
Note: Press on the number in the control panel to open a numeric keypad and
enter the required value. Press
Enter
on the Keypad pop-up window
when you are finished.
Figure 3.17 – Numeric Keypad Pop-up Window
3. Select the
Recording Mode
.
Off
,
On
, or
Automatic
. If the
Recording Mode
is
On
, the recording continues between cases.
Automatic
stops recording
between cases.
Note: The Footpedal Switch can be set up to activate the SMC Record function.
4. Press
Finished
to close the pop-up window.
