White Mini-Seis III Pro Operating Manual Download Page 49 | Manualshive

Page: 49 / 49

White Mini-Seis III Pro Operating Manual Download Page 49

Mini-Seis III Pro™ Operating Manual

Page 49

Limited Warranty

White Industrial Seismology, Inc. warrants that each new instrument manufactured or sold
by us is free from defects in materials and workmanship, and agrees to repair or replace
any part of such instrument which under normal installation and use discloses such defect,
provided the instrument is delivered intact to White Industrial Seismology, Inc. for
examination with all transportation charges pre-paid within one year from the date of
delivery to the purchaser, and that such examination discloses in the judgment of White
Industrial Seismology, Inc. that it is defective. This warranty does not extend to any parts
which have been damaged by misuse, neglect, accident or improper application, nor does
it cover batteries or expendable items which may be supplied with the equipment.

This warranty is in lieu of all other warranties expressed or implied, and White Industrial
Seismology, Inc. assumes no liability related to the use of its products other than that
specified herein.

«
...
47
48
49

Summary of Contents for Mini-Seis III Pro


















































Reviews:

No comments