Mini-Seis III Pro™ Operating Manual
Page 36
Example Steps for Monitoring Using Waveform
Mode
1.
Prepare the transducer and microphone as described in the chapter titled Field Use.
2.
Couple the transducer and microphone.
3.
Press the ON key.
4.
The first screen displayed will be the splash screen. A few moments later the
stabilization screen will appear. If the instrument does not stabilize, increase the
trigger thresholds as described in the Field Use chapter.
5.
From the Main Screen, make note of the value of the Trigger field. Remember that
when the field value shows Armed, the unit is ready to trigger to an event. If you do
not want the unit to trigger accidentally, make sure the field value shows Disarmed.
Press the Next soft key.
6.
Make sure the Waveform mode screen is displayed. If it is not, press the right arrow
key to show the Select Mode display and change to Waveform.
7.
Check the settings and make any necessary changes.
8.
If you left the Trigger field on the Main Screen on Disarmed, navigate to that screen
and change the value to Armed. Otherwise, the unit will automatically arm itself after
a brief period of inactivity, usually one to two minutes.
