FAILURE CODE
FAILURE
INDICATOR
PROBABLE
FAILURE
THE PROCESS TO
BE DONE
Err 05
The start/pause light
and program end
light blink.
The heater of your
machine or the heat
sensor has failed.
Shut down your
machine and
unplug. Turn off
your tap and contact
the authorised
service agent.
Err 06
The program ready
light and program
end light blink.
The motor has
failed.
Shut down your
machine and
unplug. Turn off
your tap and contact
the authorised
service agent.
Err 07
The program
start/pause light,
ready light and
program end light
stays on
permanently.
Configuration error.
Shut down your
machine and
unplug. Turn off
your tap and contact
the authorised
service agent.
Err 08
The start/pause
light, program ready
light and program
end light blink.
Fault error
Shut down your
machine and
unplug. Turn off
your tap and contact
the authorised
service agent.
Err 09
The program ready
light and program
end light stays on
permanently.
The network voltage
is too high or too
low.
If the network
voltage is lower than
150V or higher than
260V, your machine
will automatically
stop. When the
network voltage has
recovered, your
machine will
continue its
operation.
26
