Changing the program
If you have selected a program and you do not want it to continue:
Press the start/pause button.
Turn the program knob to the O(off) position.
Turn the program knob to the program you require. (You can select the program
that you desire from Table-1).
The program ready light will come on.
By pressing the start/pause button, run the program which you have selected.
Cancellation of the program
If you desire to end a running program early:
Press the start/pause button.
Turn the program knob to O(off) status.
Turn the program knob to the “Drain” or “Spin” programs.
The program ready light will come on.
Run the program you have selected by pressing the start/pause button.
Program ending
Your machine will automatically stop when the program you have selected ends.
The program end light will be on.
Turn the program knob to the O(off) position.
The door will be unlocked approximately two minutes after the program ends. You
can open the door by pulling the handle of the door towards yourself and take out
your clothes.
After you unload your clothes leave the door open to dry the interior of your
machine.
Unplug your machine.
Close the water tap.
WARNING!
If the mains supply should go off during a wash cycle the machine will stop, but when the
mains supply comes back on the program will continue. This is not harmful for your
machine.
Child lock
Child lock is used in order to protect the washing cycle from the effects of unwanted
button activations during the cycle. Child lock is activated by pressing the first and third
buttons on the control panel at the same time, for more than 3 seconds. When child lock
is activated, the lights on the function buttons blink to indicate that child lock is active. In
order to de-active child lock, the same buttons (1st and 3rd) should be pressed again for
more than 3 seconds. De-activation of child lock is shown by blinking of the light on the
Start/Pause button.
WARNING!
Your machine will de-activate the function buttons when the child lock is activated.
15
