Page 12 | 1-800-343-9463
SL 040418
INSTALLATION
Determine which of the four bracket
mounting options (displayed in Figure 1) will
be the most suitable for the desired position
of the cooling unit.
Foam tape needs to be placed on bracket surfaces which will be
in direct contact with the wall.
If the desired option is (A) or (B) displayed in Figure 1, the foam
tape should be placed as shown in Figure 2.
If the desired option is (C) or (D) displayed in Figure 1, the foam
tape should be placed as shown in Figure 3.
Secure each bracket to the corresponding side of the
cooling unit as shown.
Mounting
Options
Figure 1
Figure 2
STEP 5
STEP 4
STEP 6
Figure 3
A
B
C
D
