Page 4 | 1-800-343-9463
SL 040418
•
Use caution when lifting and check the package for damage.
•
Lift only at the designated hand-hold locations on the shipping container, or fully support the unit from
underneath. A shipment may include one or more boxes containing accessories.
•
Before opening the container, inspect the packaging for any obvious signs of damage or mishandling.
•
Write any discrepancy or visual damage on the bill of lading before signing.
•
Place the box containing the WhisperKOOL unit on a tabletop to prepare it for testing prior to installing.
•
Sit unit upright for 24 hours.
Note: WhisperKOOL units are manufactured in the USA and tested prior to shipment.
•
Review the packing slip to verify contents.
•
Check the model number to ensure it is correct.
•
Check that all factory options ordered are listed.
If any items listed on the packing slip do not match your order information,
contact WhisperKOOL Customer Service immediately.
Check the shipped box for the following contents:
Please leave the unit in its original box until you are ready for installation. This will allow you to move the product
safely without damaging it.
TIP: Save your box and all packaging materials. They provide the only safe means of transporting/shipping the unit.
RECEIVING & INSPECTING THE UNIT
2500
•
(1) Slimline 2500 cooling unit
•
(2) Mounting brackets
Accessory Kit #1:
•
(1) Slimline owner’s manual
•
(1) Bottle probe
Accessory Kit #2:
•
(4) 1/2” self-tapping screws (silver)
•
(4) 13/4” hex-head screws
•
(1) Drain line tube (3/8” ID clear plastic tubing)
with brass connector
•
(4) Insulation foam strips (10”)
3300
•
(1) Slimline 3300 cooling unit
•
(2) Mounting brackets
Accessory Kit #1:
•
(1) Slimline owner’s manual
•
(1) Bottle probe
Accessory Kit #2:
•
(4) 1/2” self-tapping screws (silver)
•
(4) 13/4” hex-head screws
•
(1) Drain line tube (3/8” ID clear plastic tubing)
with brass connector
•
(4) Insulation foam strips (10”)
