PREPARING THE WALL-MOUNTED EVAPORATOR (FAN COIL) UNIT
1.
Remove the knockouts that you will be using to route
the line set, power wires, display cable, bottle probe,
and drain line.
2.
Remove the insulation from the knockout holes.
3.
For ease of installation, remove the nine (9) screws
securing the top and remove the top.
Bottle probe connector routing location
Power
Line set
Drain line
•
Drill
•
5/32”
drill bit
•
1/4
” socket drill bit
•
1/4
” wrench
•
Phillips-head screwdriver
•
Tape measure
•
Drywall saw
•
Ladder
•
Level
•
Pliers
•
Pencil
Required Tools:
Drain Pan
Page 12
08/04/21