Page 44 | 1-800-343-9463
WCM
033114
CONTROLLER FUNCTIONS
Button
Normal Functions
ON/OFF
•
The ON/OFF button allows the customer the convenience of turning the refrigeration
system ON or OFF from the control panel. This feature does not disconnect power from
the unit. In order for the power to be shut off from the unit, the power cord must be
unplugged from the wall receptacle.
•
Press the ON/OFF button once for button application.
Up and Down
Arrows
•
Use these buttons to scroll up or down the CPSM (Customer Preference Selection Mode)
menu.
•
Displays the highest and lowest temperature sensed by the bottle probe. This feature
allows the customer instant access to the recorded data applicable to the bottle probe
Temperatures. It can be easily reset to reflect current temperatures.
1. Press the “UP” arrow, or the “DOWN” arrow once, and the highest or lowest temperature
(Hi/Lo) sensed by the bottle probe will be displayed.
2. To reset the Hi/Lo, press and hold the “Set” button when the Hi/Lo value is displayed on
the Digital Display, continue to hold the “Set” button until “rst” appears on the digital
display and then blinks. This will erase the past-recorded “Temperature Data History” and
start recording from the current time and temperature forward. Temperatures displayed
would reflect bottle probe temperatures from that point in time and beyond.
3. The Hi/Lo feature should be reset at initial “Start-Up” and after the cellar has obtained
normal operating temperatures, which is generally 55°F.
Cellar PreChill (CPC) The CPC feature is activated by pressing the “UP” arrow for 3-5 seconds, and the CPC logo
will be displayed on the digital display. The CPC feature can be terminated by pressing the
“UP” arrow for 3-5 seconds, or the feature will self terminate after 6 hrs.
1. The CPC feature may be used to Pre-Chill the cellar prior to loading it with warm product.
The feature will shift the Set Point down to a lower setting of 52°F for the next 6 hours.
After the 6 hour time period the set point will automatically return to the original Set
Point.
2. The CPC feature can be conveniently adjusted to the customer’s specific needs by ac-
cessing the “Customer Preference Select Mode” (CPSM). See Customer Preference Select
Mode Instructions.
Display
Set Point
Inactive
ON / OFF
Low Temp
High Temp / Pre-Chill
TEMPERATURE