R
84
Resetting the WhisperGen
Resetting the control Panel
Due to unusual circumstances, the control panel may sometimes display an incoherent message.
If this happens, the control panel should be reset.
To reset the control panel:
1. Hold down
<
for at least six seconds. A beep will be heard and the control panel will return to
the default display, indicating normal operation.
Resetting the Electronics Hardware
In some cases, extreme electrostatic interference may cause the WhisperGen to become
unresponsive to key presses on the control panel. If this happens, the WhisperGen electronics
hardware should be reset as soon as possible to ensure that the battery bank is kept charged.
To reset the WhisperGen electronics hardware:
1. Remove the enclosure lid.
When performing trouble shooting tasks on the WhisperGen, refer to
the applicable section(s) when removing or replacing parts.
R
FAULT
AUTOCHARGE
EXT CONTROL
HEAT MANAGE
STOPPING
RUNNING
STARTING
STANDBY
STOP
START
WTL0006
Battery Watts 563
Do not touch the surfaces that are labelled “Hot Surface”.
