R
21
Emergency Stopping
To stop the WhisperGen in an emergency:
1. Turn off the fuel valve in front of the WhisperGen.
The flame in the WhisperGen burner will be extinguished within a few seconds. The fuel cut-off
will be registered as a fault and the WhisperGen will stop. The fault will need to be cleared (see
section entitled Clearing Faults and Warnings) before the WhisperGen can be started again.
The WhisperGen will attemp to re-start (if auto restart is enabled). If the fuel valve remains off, the
attempt will fail. It is recommended that once the fuel valve has been turned off and the stop
button on the control panel activated, this will cancel all auto-restarts.
FUEL
OFF
ON
WTL0012
OFF
ON
FUEL
R
Personal Power Station
Note: The WhisperGen must complete a cool down sequence,
there is no way to immediately stop the engine.
Warning: In case of fire, use a carbon dioxide or dry powder
extinguisher - do not use water.
Note: To cancel auto re-start push the stop button on the control
panel.
