8
. CLEANING
SMART CLEAN
Press
and then select the “Smart Clean” function.
Smart clean
Press
to activate the cleaning function: the display
will prompt the actions to be performed in sequence
before cleaning is started. Press
anytime when done.
After the last confirm, press
to start the cleaning
cycle.
Once finished, finish the cleaning with the help of a
smooth cloth and then dry the oven cavity using a
damp microfibre cloth or the sponge.
It is recommended to perform this function after long
periods of inactivity or weekly if product is regularly
used.
DRAIN
The drain function allows the water to be drained in
order to prevent stagnation in the boiler. It is advisable
to always or periodically carry out “Draining” after the
oven has been used, especially if the oven is not likely
to be used for a long period of time. The display will
indicate when the boiler has to be completely drained.
After a certain number of uses, this action will be
mandatory and it will not be possible to start a steam
function until it is complete.
After selecting the “DRAIN” function, or when suggested
by the display, press
and follow the actions
indicated.
Once finished, drain and rinse the tank with drinking
water.
Please note: If the boiler is too hot, the function will not be
activated.
DESCALE
This special function, activated at regular intervals,
allows you to keep the boiler and the water circuit in
the best condition.
The function is divided into several phases: draining,
descaling, rinsing. Once the function is started, follow
all the steps indicated on the display and press
when
complete to start the next phase.
For best results, we recommend filling the tank with
product provided by After Sales Service (please follow
instructions provided with the product).
Do not switch off the oven until the end. Cooking
functions cannot be activated during the cleaning cycle.
Please note: A message will be shown on the display to
remind you to perform this operation regularly.
. MINUTEMINDER
When the oven is switched off, the display can be used
as a timer. To activate this function, make sure that the
oven is switched off and press
or
: The
icon will
flash on the display.
Press
or
to set the length of time you require and
then press
to activate the timer.
An audible signal will sound and the display will
indicate once the minuteminder has finished counting
down the selected time.
MINUTE-MINDER
Once the minuteminder has been activated, you can
also select and activate a function. Press
to switch
on the oven and then select the function you require.
Once the function has started, the timer will continue to
count down independently without interfering with the
function itself.
During this phase, it isn’t possible to see the
minuteminder (only the
icon will be displayed), that
will continue counting down in background. To retrieve
the minuteminder screen press
to stop the function
that is currently active.
. KEYLOCK
To lock the keypad, press and hold
for at least five
seconds. Do this again to unlock the keypad.
KEYLOCK
Please note: This function can also be activated during
cooking. For safety reasons, the oven can be switched off at
any time by pressing
.
