3-14
REMOVING THE OVEN DOOR, THE SWITCH
ACTUATORS, AND THE OUTER GLASS
CAUTION:
When you work on the microwave
oven, be careful when handling the sheet metal
parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
1.Disconnect the electrical power to the
microwave oven.
2.Open the microwave oven door and re-
move the choke cover. To do this:
a) Use a small screwdriver and pry out on
the indicated corner of the choke cover
until the bottom locking tab pops out.
Choke Cover
Pry Out
With Small
Screwdriver
3.
To remove the oven door:
a) Lift the door and remove the bottom
hinge pin from its bracket hole, then
lower the door and remove the top
hinge pin from its bracket hole.
b) Use a putty knife and pry out along the
inner edge of the choke cover.
c) Pull out on the cover to release all of the
locking tabs, and remove the cover
from the door.
Pull Out
Pry Out Along Inner
Edge With Putty Knife
b) Place the door on a padded surface
with the handle and outer glass facing
down.
Lower To Remove
Top Hinge Pin
Lift To Remove
Bottom Hinge Pin
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so could result in death or
electrical shock.
WARNING
Locking Tab
Summary of Contents for MH6140XKQ/B
