39
GB
The EXTENSO TECHNOLOGY
mode
The
can be used to set
the power of two "interconnected" hotplates to the
same level. It can be activated if the two hotplates are
OFF, by pressing the
button
The
can be activated
while the hob is on by pressing the
button once; the LEDs corresponding
to both linked hotplates light up.
The 2 LEDs remain lit as long as the hotplates are
linked (if
button is
pressed again, the hotplates are disconnected and
are both set to power level 0).
Pressing the +, - or Max buttons for one of the two
Flexi hotplates also affects the display corresponding
to the other hotplate.
To deactivate the
, press
the button .
A timer may be set for the
;
this appears on the display and both LEDs
corresponding to the linked hotplates light up. When
the Timer button is pressed, the two linked hotplates
are treated as if they were a single zone.
Selecting and using
To begin using the
, press
the button. To set the power level (see above).
operation
Once you have selected
by pressing the button , the 2 LEDs corresponding
to the
for both hotplates
light up; it will then be possible to control both as if
they were a single zone. The power level will appear
on both displays. If only the upper or lower part is in
use, the display corresponding to the unused zone
will begin to flash, and after 3 minutes cooking will
automatically revert to standard mode (not
).
Once activated, the
EXTENSO TECHNOLOGY
can
also be programmed, using the same procedure as
described for the individual hotplates.
To exit this mode, follow the procedure described above.
The display will show the text DE and OF and the hob will
be switched off. When it is next switched on, the hob will
function normally.
Accessories
For optimal
EXTENSO TECHNOLOGY
performance,
we recommend the use of pans with an elliptical or
elongated base and a major diameter of at least 250
mm; if using pans with a smaller diameter, we
recommend positioning them in the upper or lower
part as indicated by the X symbol.
If the saucepan is not in the centre of the screen
printing detail, you may hear a whistling sound or a
slight buzzing noise; this does not indicate a hob
malfunction. We recommend adjusting the position
of the pan so that it is in the centre of the EXTENSO
TECHNOLOGY zone
Technical description
The induction system is the quickest existing way of
cooking. Unlike traditional hotplates where the
cooking zone heats up, with the induction system
heat is generated directly inside pans which have
ferromagnetic bases.
Key:
I = single induction cooking zone
B = booster: the power of the cooking zone may be
boosted to 3000 W
* = the maximum power level is limited while the
booster is activated for the relevant rear cooking
zone
(see Start-up and use).
Cooking zone
Power (W)
Back Left
I 1400
Back Right
I 3000 – B 4000
Front Left
I 1400
Total power
6800
Accessories
CONNEXION ZONE
CONNEXION ZONE
CONNEXION ZONE
CONNEXION
ZONE
CONNEXION ZONE
CONNEXION ZONE
CONNEXION ZONE
CONNEXION ZONE
CONNEXION ZONE
CONNEXION ZONE
CONNEXION ZONE
CONNEXION ZONE
CONNEXION
ZONE
Summary of Contents for AXMT 6634/IX
Page 1: ...AXMT 6634 IX AXMT 6634 WH ...
Page 43: ...43 ...
