KEEP WARM
This function automatically sets a power level that keeps just-cooked food
hot and serving dishes warm (with induction-suitable accessory).
Press the
button: “A” appears on the display and the indicator light turns on.
To deactivate the function, simply press
button.
SIMMERING
After bringing to the boil, press the
button and the hob will automatically
set the correct power level to keep the pot simmering. “A” appears on the
display: the indicator light lights up. To deactivate the function, simply press
button.
MELTING
This function maintains a permanently low temperature in the cooking zone.
After positioning the pot/accessory on the chosen cooking zone, switch on
the hob and select the cooking zone. Press the
button. “A” appears on
the display: the indicator light lights up. To deactivate the function, simply
press
button.
FAST BOIL FUNCTION (BOOSTER )
This function, only present on some cooking zones, makes it possible to
exploit the hob’s maximum power (for example to bring water to the boil
very quickly).
To activate the function, select the cooking zone and keep the corresponding
“+” button until “P” appears on the display. After 10 minutes use of the
booster function, the appliance automatically sets the zone to level 9.
FLEXI COOK
This function allows you to use the cooking area as two separate cooking
zones or as an extra-large single zone.
It is perfect for oval, rectangular and elongated pans (with maximum base
dimensions of 38x23 cm) or more than one standard pan in the same time.
In order to activate the Flexi Cook function, switch on the hob, press
simultaneously the “+” and “–” buttons as shown in the picture below: the two
cooking zone displays show level “0”; both dots next to the level number are lit,
indicating that the Flexi Cook is activated.
To change the power level (from 1 to a maximum of 9 or P), press the external
“+” / “–” buttons (
).
To deactivate the Flexi Cook function, press simultaneously the internal
“+” and “–” buttons (
)
.
IMPORTANT:
The message “no pot” (
) will appear on the display
of the zone that is not able to detect any pot (because of missing pot, or
misplaced or not suitable for induction hob). This message remains active
for 60 seconds: in this time you can add or slide pots within the Flexi Cook
area as you prefer.
After 60 seconds if no pan is placed on the zone, the system stops “searching”
pots on that zone, the symbol (
) remains visible on the display to remind
that the zone is disabled.
To reactivate the Flexi Cook function, press one of the 2 buttons
.
The Flexi Cook function is also able to detect when a pot is moved from one
zone to the other one within the Flexi Cook area keeping the same power
level of the zone where the pan originally was placed (see the example in
the figure below: if the pot is moved from the front heater to the rear heater,
the power level will be shown on the display corresponding to the zone
where the pot is placed).
It is also possible to operate the Flexi Cook area as two independent cooking
zones, using the corresponding button of the single zone. Place the pot in the
center of the single zone and adjust the power level with the “+” and “–” buttons.
IMPORTANT:
make sure to place the pans centered on the cooking zone in
the way to cover the center of the single cooking zone.
In case of big pot, oval, rectangular and elongated pans make sure to place
the pans centered on the cooking zone.
Examples of good pot placement and bad pot placement:
ACTIVATION/DEACTIVATION OF THE ACOUSTIC SIGNAL
After switching the hob on, press and hold the “−” of the first cooking
zone and the external button on the right simultaneously for at least
five seconds (as shown below).
5 Sec.
EN
