Whirlpool ACD052MM, Service Manual

Page: 25 / 52

3-11
10. Loosen the clamp screw on the condenser
fan blade and slide the clamp off the fan.
11. Remove the two screws from the con-
denser fan shroud.
6. Remove the four screws from the brace
and remove the brace.
7. Remove the eight screws from the top air
guide.
Brace Screw (1 of 4)
Top Air Guide Screw
(1 of 8)
Top Air
Guide
Brace
8. Lift the top air guide off the upper styrofoam
air shields and rotate the guide to the left,
(facing front). Lay the guide on the work
surface out of the way.
9. Carefully lift the two upper styrofoam air
shields off the unit.
Rotate Air Guide
Fan Blade
Clamp
Screw
Fan
Shroud
Upper Styrofoam Air Shields
12. Remove the two fan motor clamp screws
and remove the clamp.
13. Carefully lift the fan motor assembly, the
condenser fan shroud, and the lower
styrofoam air shield, and remove them
from the unit.
Lower
Styrofoam
Air Shield
Condenser Fan
Fan Shroud
Screw (1 of 2)
Motor Clamp Screws
Continued on the next page.