Whirlpool ACD052MM, Service Manual

Page: 26 / 52

3-12
Red Black
Wire Clamp Screw
19. Loosen the evaporator fan screw. NOTE:
Use the slot in the fan blade to access the
screw.
20. Pull the evaporator fan off the motor shaft.
18. Pull the condenser fan blade and fan
shroud off the fan motor (see the photo at
the top of the next column).
Fan Shroud
Evaporator Fan Screw
Ground Wire
15. Models ACD052MM, ACM052MM, &
ACM062MM:
Disconnect the black, red,
and blue wires from the fan speed control
terminals. NOTE: The model ACD052MM
does not use the blue wire.
16. Disconnect the white and brown wire con-
nectors from the capacitor terminals.
17. Remove the screw from the wire clamp
and remove the motor wires from the
clamp.
Blue Red
Black
Fan Speed
Control Wires
Fan Access
Slot
14. Models ACQ058MM & ACQ062MM: Dis-
connect the black, red, and blue wires
from the electronic control board termi-
nals.
Condenser Fan Blade
White & Brown
Capacitor Wires