WHILL C2, User Manual

Page: 65 / 114

64
WHILL Model C2/Ci2 User Manual
5
5.2.4. Installing the battery
WARNING
˜
Do not touch the connectors directly, allow them to become wet, or bring any metal or other
foreign objects close to them. Ensure that there are no foreign objects when assembling.
There is a risk of injury or electric shock as well as damage to the device or its components.
Install a charged battery and turn on the power after 5 seconds. If the unit does not start up properly, remove the
battery and reinsert it after at least 10 seconds.
If the device cannot be used even though the battery is inserted/removed several times, a malfunction may have
occurred. Please contact your distributor or customer support.
1.
Ensure that the battery lock release button is not
pressed.
2.
Grab the battery handle and insert the battery into the
battery compartment.
The battery weighs 6.0 lbs (2.7 kg). Handle the
battery with care – dropping it will increase a risk of
injury and damage to the battery.
3.
Insert the battery straight and press it until it clicks.
When it is difficult to insert the battery, push it from
the front with force.
If the battery does not easily set in place, the cap may
be attached on the battery connector or there may be
a foreign object inside the compartment. Shine a light
inside the compartment and check. If there is a foreign
object, ensure you remove it with a small brush, etc.
before trying again.