WHILL C2, User Manual

Page: 36 / 114

35
WHILL Model C2/Ci2 User Manual
4
4. Operating procedures
4.1. Inspection before getting in the device
Inspect the following before getting in the device.
¢
Inspection items
1. Inspection with the power off
Assembly
• Check that all parts are correctly assembled and that there are no missing, broken, damaged, or loose
parts.
• Check that the seat release lever and base release handle are locked.
Function
• Check that the joystick moves smoothly.
• Check that the brakes can be released and the device can be pushed manually. Also, check that when the
brakes are locked, the device does not move when pushed.
Wheels
• Check that there is no visible deformation or cracking of the front omni-wheels or rear wheels.
• Check the treads of both rear wheels and ensure they are not worn down by more than 1/64 inches (0.5
mm).
• Check that the front omni-wheels are not worn down by more than 1/64 inches (0.5 mm) or that the metal
of the core part is not exposed.
2. Inspection with the power on
• Check the battery charge level on the display and the charge level is sufficient.
• Check that the switches on the control pad are functional.
• Check that the entire display is functional.
• Check that the sound button is functional.
• Check that the wheels are not making unusual noises when they spin.
• If you encounter any of the problems as listed above, which you are unable to resolve, contact your
distributor or customer support.
• White stains may be observed on the rollers of the product's front wheel (omni-wheel). They are the wax
component of the anti-degradation material contained in the rubber rising to the surface and poses no
quality problems.
WARNING
˜
Before use, check for any improperly assembled, missing or broken components, and check
that the brakes are locked.
There is a risk of injury or accident. If components need to be replaced or repaired, stop using
the device immediately and contact your distributor.
CAUTION
˜
Do not ride on the anti-tip bar.
The device may lose its anti-tipping functionality if the anti-tip bar is deformed. Contact your
distributor for replacement if it is deformed.