Whelen Engineering Company E-2010, Operation & Installation Manual

Page: 8 / 22

4
Menu Selections
This section describes the function of each button in the Menu Selection portion of the keyboard. In
general, the Down arrow (within the Menu Selections portion of the keyboard) is used to scroll through
the functions as listed below. The Up arrow (within the Menu Selections portion of the keyboard) may
also be used to scroll up through the list. The four large buttons contain actual remote siren functions,
such as Warning Tones or Status Requests.
WARNING TONES
CANCEL Terminates all siren activity.
WAIL Activates the Wail Tone.
ATTACK Activates the Attack Tone.
ALERT Activates the Alert Tone.
PUBLIC ADDRESS Enables the Public Address mode.
AIR HORN Activates the Air Horn Tone.
HI-LO Activates the Hi-Lo Tone.
WHOOP Activates the Whoop Tone.
NOON TEST Activates the Noon Test function.
VOICE MESSAGES
MSG 1 Activates Digital Voice Message 1.
MSG 2 Activates Digital Voice Message 2.
MSG 3 Activates Digital Voice Message 3.
MSG 4 Activates Digital Voice Message 4.
MSG 5 Activates Digital Voice Message 5.
MSG 6 Activates Digital Voice Message 6.
MSG 7 Activates Digital Voice Message 7.
MSG 8 Activates Digital Voice Message 8.
MSG 9 Activates Digital Voice Message 9.
MSG 10 Activates Digital Voice Message 10.
MSG 11 Activates Digital Voice Message 11.
MSG 12 Activates Digital Voice Message 12.
MSG 13 Activates Digital Voice Message 13.
MSG 14 Activates Digital Voice Message 14.
MSG 15 Activates Digital Voice Message 15.
MSG 16 Activates Digital Voice Message 16.
ROTATING DIRECTION
NORTH Positions a 4000 Series Siren to North.
EAST Positions a 4000 Series Siren to East.
SOUTH Positions a 4000 Series Siren to South.
WEST Positions a 4000 Series Siren to West.
CLOCKWISE Increments a 4000 Series Siren 45
°
CW.
COUNTER CLOCKWISE Increments a 4000 Series Siren 45
°
CCW.
ROTOR POSITION Rotor/speaker position request.
STATUS
SILENT TEST Initiates the Silent Test function.
INST STAT Get real time (instant) status of Remote Siren.
BATT/TEMP Request battery voltage and cabinet temperature.