Wheatstone TV-80, Technical Manual

Page: 56 / 120

S T E R E O M A S T E R S
page 4 – 4
TV80 / Sep 98
Fader Panel Controls
Each stereo master module has an associated fader panel
located directly below it. Starting from the bottom, these panels are
configured as follows:
Fader
A 3000 Series Penny & Giles long-throw (104mm) stereo
fader. Plug-in for easy servicing.
Channel ON
This momentary action lighted pushbutton switch turns the
module on and off.
Sum VU
An LED ladder display that meters the module’s stereo master
summed L+R output. Note the meter may be programmed (by an
internal PCB-mounted slide switch, see page 4-5) to monitor pre
or post fader. It is always, however, pre channel ON/OFF, allow-
ing it to function as a signal present indicator.
Metering
Stereo Masters
Like inputs and submasters, stereo master fader panels have
built-in mono sum LED VU ladders with PCB-mounted calibra-
tion trimpots. They may also be metered (PFL or AFL) at the stereo
SOLO meter. However, they additionally have dedicated L-R VU
meter pairs in the console’s meterbridge (these are calibrated by
recessed trimpots in the middle of each stereo master module
faceplate). A PEAK LED indicator is also mounted at the bottom
of the main module faceplate.
15
12
-
-
-
-
3
0
3
+
-
6
9
SUM
VU
0
5
10
15
20
30
40
50
60
70
00
MASTER
4 ON
FADER PANEL