Wheatstone Corporation AURA 8IP Page 47 Technical Manual Download

Page: 47 / 48

page 3 - 24

Aura8ip / Jan 2012

A u r a 8 i p P r o G U I

Title Bar Region

As was hinted at in the section of the manual pertaining to configuring and selecting

devices, the Aura8ip Pro GUI is capable of controlling hundreds of Aura8ip units on

the same connected network.

Along the top edge of the Aura8ip Pro GUI screen and between the “Vorsis Aura8ip

Pro” product label on the left and the Windows About/Minimize/Exit icons on the right

are four status indicators and controls for the management of devices and presets.

The first is a small button with embedded green indicator. This button is used to put

the Pro GUI online to an Aura8ip device. When the indicator is green the Pro GUI is

connected to, and is controlling, the selected Aura8ip device.

Status

When a connection is attempted, made, or disconnected the Status window will

display the status of this action. When the display indicates Offline no connection to

an Aura8ip device is being attempted.

When the Status window indicates Trying the Pro GUI is in the process of establish-

ing a connection to a remote Aura8ip device. As long as the status is Trying the device

has been found but full communications has not been established.

When the Status window indicates Online, the Pro GUI is in command of the con-

nected device

Devices

This window indicates what device has been selected for control from within the

Devices dialog covered earlier. If no device is displayed, or if it indicates “Unknown”

then no device has been configured or selected in the Devices dialog.

Presets

This window shows the currently running processing preset. If the text is displayed

in green, all parameters that were originally saved with the preset are still active and no

changes have been made to any of the settings. If the text is displayed in orange, then

one or more parameters in the current preset has been modified and the new settings

have NOT yet been saved as a new preset. If the text is displayed in orange and a new

preset is taken, any changes preset in the previous preset are lost forever. This may or

may not be the desired action – be careful!

Summary of Contents for AURA 8IP

















































Search results

Summary of Contents for AURA 8IP

Reviews:

Related manuals for AURA 8IP

Brands by name

Popular brands

Wheatstone Corporation AURA 8IP, Technical Manual

Search results

Summary of Contents for AURA 8IP

Reviews:

Related manuals for AURA 8IP

Brands by name

Popular brands