Wheatstone Corporation AURA 8IP Page 23 Technical Manual Download

Page: 23 / 48

page 2 - 9

Aura8ip / Jan 2012

A u r a 8 i p G U R U G U I

• The Guru GUI can only modify virgin

Factory

presets.

Guru GUI relies on known starting points within the Factory presets before it can

make modifications. Therefore the only presets that can be modified by the Guru

GUI are Factory

presets.

• Once a Factory preset has been modified by GUI Professional it cannot be

modified using Guru GUI.

If a Factory preset has been modified by the Professional GUI it is no longer a

“Factory” preset and therefore it is not allowed to be modified using Guru GUI.

Understanding the Differences Between Factory, Legacy, and

Guru Presets

•

Factory presets are those created by the Factory using specialized tools.

•

Legacy presets are presets that are created by a customer using the full control

Professional GUI, or those created and saved by the Guru GUI.

• The biggest difference between the two types of presets is that the Guru GUI is

permitted to modify only Factory presets.

• If while using the Guru GUI you receive the “Restricted Preset” dialog, shown be

low,

and

you know for sure that the preset being adjusted is a virgin Factory preset,

simply recall the preset again using the Guru GUI and the error should disappear.

Additional Notes on Aura8ip and Network to GUI Connectivity

Aura8ip utilizes both TCP/IP and UDP to communicate with the remote GUI.

TCP/IP utilizes Port 55901 and the first available UDP port in the range of 60001 to 60010

during communications sessions.

TCP/IP - The TCP protocol is used for controlling the Aura8ip and reporting its

control settings back to the GUI because TCP repairs

any transmission errors that might

have occurred on the network. Using TCP for this function guarantees that the Aura8ip

controls always

do exactly what the GUI tells them to do, and that the control settings

seen on the GUI are in perfect agreement with what the Aura8ip hardware

thinks they are.

UDP - Metering between the Aura8ip and the GUI works differently. For this task we

chose the UDP protocol, a simple data transmission model without any hand-shaking to

drive the meters. We used UDP for metering because of its very low overhead at both ends

of the link, and because we don’t mind if an occasional meter data packet (or a bunch of

meter packets) gets lost on the network. Metering data is updated frequently so a missed

metering packet here or there has an inconsequential effect on the visual appearance and

no impact whatsoever on the sound.

Summary of Contents for AURA 8IP

















































Search results

Summary of Contents for AURA 8IP

Reviews:

Related manuals for AURA 8IP

Brands by name

Popular brands

Wheatstone Corporation AURA 8IP, Technical Manual

Search results

Summary of Contents for AURA 8IP

Reviews:

Related manuals for AURA 8IP

Brands by name

Popular brands