ENGLISH INSTRUCTIONS
4
1.
DO NOT
use the
Grinder
without the
Tray/
Safety Guard
secured into place.
2.
ALWAYS DISCONNECT Grinder
from power
source before servicing, changing accessories or
cleaning the unit.
3. Plug the
Grinder
into a standard 120 Volt, 60
Hz wall outlet. Check if the voltage indicated on the
appliance corresponds to the local voltage before
you connect the appliance.
4.
DO NOT USE
the
Grinder
if the
Power Cord,
Plug
or any other parts are damaged. If the
Power
Cord
or the
Grinder
is damaged, call Customer
Service.
DO NOT ATTEMPT TO REPLACE THE
CORD.
Be sure to not allow the
Power Cord
to drape into your work area. Check that all parts
are operating properly, and perform the intended
functions. Check for alignment of moving parts or
any other conditions that may affect the operation.
5.
NEVER
use any accessories or parts from
other manufacturers. Doing so will VOID YOUR
WARRANTY and may cause fire, electrical shock or
injury.
6. TO PROTECT AGAINST RISK OF
ELECTRICAL SHOCK:
DO NOT
SUBMERGE THE
MAIN GRINDER BODY
INTO WATER OR LIQUID.
BE SURE THE
GRINDER
IS DISCONNECTED
FROM THE POWER SOURCE BEFORE
CLEANING. Wash all parts by hand and thoroughly
dry. Thoroughly clean all parts that will come
in contact with food before using the appliance.
NEVER
rinse appliance
Grinder Motor
under tap,
only use a moist cloth to clean the
Grinder Motor
Unit
.
7. Reduce risk of unintentional starting. Make
sure the
Power Switch
is in the “OFF” position
before attaching to the power source.
8.
KEEP FINGERS CLEAR
of the
Auger
and
Cutting Blades
AT ALL TIMES
.
NEVER REACH
INTO THE GRINDER
, doing so may cause serious
injury.
ALWAYS USE THE PROVIDED STOMPER,
NEVER FEED FOOD BY HAND.
9.
NEVER
use fingers to scrape food away from
the
Grinding Plate
while the
Grinder
is in operation.
SEVERE INJURY MAY RESULT.
10.
NEVER OPERATE THE GRINDER
UNATTENDED.
Be safe,
DISCONNECT
the
Grinder
from power source before leaving the work
area. Close supervision is necessary when any
appliance is used near children. This appliance is
NOT
to be used by children.
GENERAL SAFETY RULES
READ AND FULLY UNDERSTAND ALL INSTRUCTIONS AND WARNINGS
PRIOR TO USING THIS UNIT. YOUR SAFETY IS MOST IMPORTANT!
FAILURE TO COMPLY WITH PROCEDURES AND SAFE GUARDS MAY
RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE. REMEMBER:
YOUR PERSONAL SAFETY IS YOUR RESPONSIBILITY!
11. Avoid contact with moving parts. Wait until all moving
parts have stopped before you remove any part of the
Grinder
.
.
TIE BACK
loose hair and clothing, and roll up long
sleeves before operating the Grinder.
REMOVE
ties, rings,
watches, bracelets, or other jewelry before operating the
Grinder
.
13. Be sure the
Grinder
is on a stable work surface. Be
sure all the
Grinder Feet
are stable.
14.
DO NOT
attempt to grind bones, nuts or other hard
items. DO NOT let cord come in contact with a hot surface.
DO NOT use on an oven or stove. Check if the voltage
indicated on the appliance corresponds to the local voltage
before you connect the appliance.
15.
DO NOT
run
Grinder
without meat in the
Head
.
Severe damage to the
Head
and
Auger
may occur.
16.
WEAR EYE PROTECTION.
Wear safety glasses.
Everyday eye glasses are not safety glasses. Safety
glasses conform to ANSI Z87.1 requirements. Note:
approved safety glasses have Z87 printed or stamped on
them.
17.
DO NOT
use outdoors.
18.
DO NOT
use the
Grinder
while under the influence of
drugs, medications or alcohol.
19.
DO NOT
let the
Power Cord
hang over edge of work
surface.
20.
DO NOT
attempt to operate the
Grinder
if the
Grinder
itself is cold. The
Grinder
temperature should be
at least 45
o
F (7
o
C) before beginning.
21. The
Gear Housing
and the
Motor Cover
may
become HOT during operation. This is normal.
DO NOT
touch these parts during operation or until they cool after
use.
22.
WARNING:
Busted, splintered bones can get into the
digestive tract of a pet and cause severe damage, even
death by puncturing the walls of the intestines or even
stomach
23. Weston Pro Series Electric Meat Grinders (#22 and
#32) are capable of grinding smaller, softer animal bones
such as rabbit, whole chickens* or chicken quarters, and
other birds, due to both the power and all metal construction
of the units.
24. Avoid grinding large, dense animal bones as they are
very difficult to process (i.e., bones one would find in large-
game, pigs, or cows).
SAVE THESE INSTRUCTIONS
