17
INSTRUCCIONES EN ESP
AÑOL
INSTRUCCIONES EN ESP
AÑOL
GRINDING TIPS
SAFETY GUARD INSTRUCTIONS
(Only applicable on#22 & #32 Grinders)
The #22 and #32 Grinders are
equipped with a Safety Guard. This
Safety Guard is here to prevent
injury to the user. The only reason
that the Safety Guard should be
removed is for cleaning purposes,
then it should be IMMEDIATELY
REPLACED.
To remove the Safety Guard, use
the provided Flat-head Screwdriver
to loosen all four of the screws that
hold the Safety Guard to the Tray
(FIGURE 14).
There is no need to
completely remove the screws from
the Safety Guard, as they can be
easily lost.
Remove the Safety Guard, clean
as instructed in the “Cleaning
Instructions” then IMMEDIATELY
REPLACE the Safety Guard onto
the Tray.
WARNING!
Before cleaning, assembling or disassembling the
Grinder, make sure the Grinder Motor is OFF and the PLUG IS REMOVED
FROM THE OUTLET/POWER SOURCE!
FIGURE 14
Safety
Guard
NEVER operate Grinder without the
Tray/Safety Guard secured in place.
To avoid serious or fatal injury, NEVER reach
into any Grinder inlet.
ALWAYS use the Stomper to push meat
into the Grinder Head.
Read & fully understand all instructions
& warnings prior to use.
WARNING!
