34
Cleaning and maintenance
704 67 020 00 _ 111
GF Robimat XL / XM
OPERATING INSTRUCTIONS
5.5 Cleaning the intermediate panel (High Security version only)
The high-security version features an anti-vandalism panel.
This includes an intermediate panel, which can be cleaned if necessary.
In order to open the intermediate panel remove the 8 stud bolts and fold
out the polycarbonate panel (anti-vandalism panel) with its frame.
Clean the polycarbonate panel thoroughly with a non-abrasive, pH-
neutral cleaning agent and hot water.
The cleaned surfaces must be completely dry before the panel is
closed!
Re-insert the stud bolts and check if the polycarbonate panel (anti-
vandalism panel) is correctly positioned.
5.6 Cleaning the product containers
Dirty bottles or cans may lead to soiled (sticky dirt or glue
residues) product compartment floors. This means that more
effort is required to move the products. It might also cause
motor failure.
Make sure that the surface area of the product
compartments is free from dirt and residue.
Clean the surfaces with a lint-free, damp cloth, hot water and
commercially available detergent. Then wipe the product
containers dry.
5.7 V����������
Clean the floor of the vending machine, if necessary. The flat cable
must be free from debris. Ensure that it can move without obstruction.
Clean the surfaces with a lint-free, damp cloth and hot water with
commercially available detergent.
Vending machine floor
Anti-vandalism panel
Stud bolts 8x
The surface of the product compartments must be clean!
ATTENTION! Risk of damage!
The use of abrasive, acidic or alkaline cleaning agents may
cause stress cracks in the polycarbonate window.