30
Daily use
704 67 020 00 _ 111
GF Robimat XL / XM
OPERATING INSTRUCTIONS
4.5 Filling the product containers
•
To fill, pull out the product container to its stop position. The upper-
most product container can be tilted.
•
There are 3 product compartments per level. Always pull out, fill
and replace only one product container at any one time.
•
Always pull out the product containers slowly to their stop position.
This is to avoid products tilting and falling out.
•
If a product container is empty, push the product pusher right to
the back by hand. Press only against the lower part of the product
pusher.
•
Fill the products loosely. Products must not be compacted.
•
In order to avoid products falling out of the product container while
it is in a tilt position, hold the front product with one hand and fill
with the other hand.
•
When filling is complete push the product container slowly
backwards until you hear it click into place. Otherwise malfunctions
may arise.
•
The product container is in correct vend position when it
rests against the rear wall and is flush with the other product
compartments at the front.
•
After filling, check that the machine is working correctly. Close the
door and make some vends using coins.
Important: always pull out, fill and replace
only one product compartment.
Caution, risk of damage! Due to
overload, never pull out and fill 3 product
compartments at the same time
ATTENTION!
Caution, the product pusher will jam if it is
held at the top when pushing it backwards.
Only press against the lower part of the
product pusher!
NOTE!
•
The machine may only be filled by trained personnel.
•
Products can fall out of the product containers during
the filling process. For this reason please handle
carefully and always hold the front product securely.
•
The service key must not be inserted whilst the
machine is being filled.