28
Daily use
704 67 020 00 _ 111
GF Robimat XL / XM
OPERATING INSTRUCTIONS
4.2 Product compartments/ Product compartment
Gear wheel
for drive
Toothed belt
Pusher
Retaining spring
Tilt mechanism
How the product container works
The bottles are placed in a row in each compartment. When a bottle is to be dispensed from a compartment, the
respective gear wheel at the front of the compartment must be powered by the drive in the product basket. The pusher
is moved via a toothed belt. This guides all bottles in the compartment forward until the front bottle has pushed the two
retaining springs aside and falls into the basket. The light barrier is activated. The basket with the bottle inside is then
moved to delivery position.
Toothed belt
Gear wheel
Pusher
Retaining spring
All bottles are moved;
some effort required
Due to the weight of the bottles and their frictional
resistance, the base of the product container should not be
soiled with any residue.
Therefore, make sure that the surface of the product
container is clean at all times! See shaded area in the
picture.
Retaining spring
The retaining spring has important functions and must not
be removed.
•
Retaining:
The first bottle is prevented from tipping over the edge.
•
Accelerating/ Flipping
After the bottle has bent the springs completely open,
it is moved by the flicking of the springs. The bottle will
be safely transported into the basket.
•
Limit stop during filling
When the bottles are loaded, the first bottle is
restrained from tipping.
Be careful when the product container is tilted! Always
support the springs by hand and push back the
product container.
The retaining springs must be arranged in pairs.
