Westlab 4500RPM Max, Manual

Page: 11 / 12

•
ORDERING WITH
WESTLAB IS EASY
Online
www.westlab.com.au
Order online with our easy
Express Order form for fast,
secure ordering.
Phone
1800 358 101
Speak to one of our friendly,
efficient staff from
8.00am - 5.00pm (Mon/Fri)
Email
sales@westlab.com.au
24 hours, 7 days a week
convenience.
11
PRODUCT MANUAL
1800 358 101
sales.au@westlab.com
www.westlab.com.au
+64 9 553 3677
sales.nz@westlab.com
www.westlab.co.nz
646 568 5391
sales.us@westlab.com
www.westlab.com
1 877 822 1455
sales.ca@westlab.com
www.westlab.com
Australia New Zealand United States Canada
Error Code Cause Corrective Steps
Last run
memory not
displayed
Turning the centrifuge ON
immediately after turning it OFF
Maintain a three second gap
between turning the centrifuge
OFF and ON again.
System
locks up*
Electronics error Turn the centrifuge OFF and
then ON. If the error persists,
contact the technical support
team.
* If the system locks up or overheats due to over current, turn the centrifuge OFF and
then ON again.
ATTENTION: If the motor overheats, there will be a fluctuation in speed value to allow
the centrifuge to cool down for at least 30 minutes. Do not use the unit for 30 minutes.
8. Product Recycling
In the case that the product is to be disposed of, the relevant legal regulations are
to be observed.