4
PRODUCT MANUAL
1800 358 101
www.westlab.com.au
+64 9 553 3677
www.westlab.co.nz
646 568 5391
www.westlab.com
1 877 822 1455
www.westlab.com
Australia
New Zealand
United States
Canada
3. Safety Precautions
Read the following safety precautions prior to using the centrifuge. Never use the
centrifuge in any manner not specified in this manual.
•
Always use recommended original rotors and spare parts for best results and
product safety.
•
The rotors must be loaded symmetrically. Each tube should be counterbalanced
by another tube of the same weight.
•
Do not use the centrifuge or rotor that have not been correctly installed or show
signs of damage.
•
The rotor must always be securely fastened. If the centrifuge makes an unusual
sound during operation, the rotor fitment needs to be checked. Switch OFF the unit
immediately by pressing STOP, check the fitment and fasten it.
•
Never move the centrifuge during operation.
•
Prior to centrifugation, the tubes should be visually inspected for material damage.
Damaged tubes must not be centrifuged since they can result in sample loss and
may create imbalance.
•
Do not fill tubes while they are in the rotor. Liquid spillage may harm the unit.
If liquids are spilled on the rotor or the rotor chamber, the centrifuge must be
cleaned carefully before resuming operations.
•
The centrifuge may be used for the specified applications only. It must not be
operated in a hazardous or flammable environment or used to centrifuge explosive
or highly reactive substances. Do not place potentially hazardous material within the
clearance area or envelope.
•
If used in a manner not specified in this manual or by the manufacturer, the product
warranty may become void.
•
In the event of contamination caused by aggressive agents, the rotor must be
cleaned immediately with a natural cleaning liquid. Pay particular attention to the
bores of the tubes. If any damage is seen, contact the service technician.
•
Before using cleaning or decontamination methods, other than those mentioned by
the manufacturer, contact the manufacturer to endure that the intended method will
not damage the centrifuge.
•
For safety, protective earthing is provided with the power supply.
Ensure that the power supply is earthed.
•
Always install the unit on a flat, stable, and non-slippery surface.
•
Wear protective gloves and safety glasses while operating the unit.
•
Always unplug the power adaptor before cleaning the unit.
•
Never touch moving parts.
The safety of the user cannot be guaranteed if the unit:
•
Is operated with accessories that are not supplied with the unit.
•
Is operated with accessories that are not supplied or recommended
by the manufacturer.
•
Is operated improperly or contrary to the manufacturer’s specifications.
