18
Assembling
Switching ON
The meat grinder is equipped with two switches, the main switch (4)
and the ON/OFF switch (5).
Make sure the ON/OFF switch is in the position
O
before plugging in
the power cord.
Insert the power plug into the socket.
Forward Operation
1. Place the main switch (4) in the position
ON
.
2. Press the ON/OFF [ON O R] into the position
ON
.
3. To switch off, press the ON/OFF switch into the position
O
.
Reverse Operation
1. Place the main switch (4) in the position
R
.
2. Press the ON/OFF [ON O R] into the position
R
.
Use this function if the cutter housing is blocked or clocked.
Attention: Wait until the motor has come to standstill before pressing
the reversal button.
If the blocking cannot be released at all, switch off the appliance.
Pull the power plug, disassemble the cutter housing and clean it
thoroughly.
Hints
Allow the appliance to make 4
– 5 turns without food, so
remaining food can fall into the bowl.
Switch off the appliance and pull the power plug.
Please note, the grinding disc might get stuck onto the worm
shaft and cannot be removed easily. To remove the grinding
disc, use a suitable and clean object and lift up the grinding disc
from the worm shaft.
Summary of Contents for 85 42 88
Page 3: ...III bersicht Overview 7 8 9 10 1 2 3 4 5 6 11 12 13 14 15 16a 16b...
Page 11: ...7 Zusammenbau...
Page 20: ...16 Assembling...