background image

9

3     SAFETY SIGN LOCATIONS 

The types of safety signs and locations on the equipment are shown in the illustrations that follow. Good 
safety requires that you familiarize yourself with the various safety signs, the type of warning and the 

area, or particular function related to that area, that requires your SAFETY AWARENESS.

• Think SAFETY! Work SAFELY!

REMEMBER - If safety signs have been damaged, removed, 

become illegible or parts replaced without safety signs, new signs 
must be applied. New safety signs are available from your author

-

ized dealer.

A

FIRE HAZARD

NO SMOKING

To prevent serious injury or death 

from fire:

Do not smoke when refueling.

Keep sparks, flames and hot mate

-

rial away from fuel and TransCube.

DANGER

B

OPERATING INSTRUCTIONS

Read "Users Notice" and Operator's

Manual before using fuel tank.

This equipment is designed for the trans-
port of diesel fuel, for refueling equipment
or generator stand-by.

The tank must be level while filling.

Fill only with a hand held trigger nozzle.

Take care not to spill on the ground or in
the tank.

Do not smoke whe

n refueling.  Keep

sparks, flames and hot material away

from fuel and fuel tank.

Do not overfill.  95% capacity is maximum

legal limit.

Always replace filler cap and turn pump
off (lever down).

Store diesel hose and nozzle inside outer tank.

Close all valve outlets and lock lid when transporting on public
highway.

Follow the regulations for Transport of Dangerous Goods.

Check for fluid in outer tank and empty regularly - refer to mainte

-

nance manual for detailed procedure.

TC0206

TC0207

A

B

Summary of Contents for TransCube 05TCG

















































Reviews: