18
Fig. 8 FILLING
Hatch Lid Locked
Filling
4.
Filling TransCube:
A 3 inch fill cap is located on
the top of the tank and is used
to fill the tank. Turn the cap to
open the tank for filling. Open
the cap slowly to release any
build-up of pressure due to
extreme temperatures. Close
and tighten cap when filling
is completed. Follow this
procedure when filling tank:
a.
Level the tank or the vehi-
cle that it is mounted on.
b. Loosen fill cap and lay to
the side.
NOTE
The cap is tethered to
the frame with a steel
cable to prevent it from
falling between the
tanks. Keep cable in
good working condition.
Do not disconnect.
c. Fill the tank with a hand-
held nozzle.
d. Watch the fuel gauge on tank while filling
to only fill to 95% capacity. 95% is the
legal capacity for the TransCube.
e. Close and tighten fill cap.
IMPORTANT
Do not direct connect.
Take care not to spill
any fuel.
FIRE HAZARD
NO SMOKING
To prevent serious injury or death
from fire:
• Do not smoke when refueling.
• Keep sparks, flames and hot material
away from fuel and fuel tank.
DANGER
TC0207
b
f.
Close and lock the hatch lid.
NOTE
Hand tighten fill cap and
then tighten another
1/4 turn to minimize the
chance of leakage.
