Lit. No. 72131, Rev. 00
July 15, 2018
72
ACCESSORIES –
STROBE LIGHT
STROBE LIGHT OPERATION
The strobe light comes with a pre-set
fl
ash pattern.
In some instances, it is possible for this default
pattern to change to a "Steady On" mode. Should
this occur, the
fl
ash pattern can be changed to any
of 11
fl
ash patterns.
1. Cut the wire seal off the yellow wire and strip
1/4" of insulation.
2. With the strobe ON, intermittently apply 12V
from the vehicle power supply to the yellow
wire until the strobe achieves the desired
fl
ash
pattern:
3. Reseal the yellow wire.
NOTE: The white wire is not used.
MODE
PATTERN
0
Random
1
Steady
2
Single
3
Mega
4
Double
5
Triple
6
Quad
7
Quint
8
8 Flash
9
Single-Quad
10
Single H/L
11
Single-Triple-Quint
Excerpts taken from Strobe Light Kit Steel Hopper Spreader Installation Instructions (Lit. No. 92945, Rev. 02).
Summary of Contents for LOW-PRO 300W
