9
LOWERING THE ELECTRONICS PLATE
1. Remove the two (2) captive screws holding the Electronics Plate to the
Electronics Carriage.
2. Slowly, allow the Electronics Plate to swing down, making access easier
for wiring and service (As seen in Fig. 8).
REMOVE THE ELECTRONICS CARRIAGE
1. Once the Electronics Carriage has been lowered from the Main Enclosure,
disconnect the AC power and ground connections from the Power Supply
board.
2. Disconnect the green ground wire from the Electronics Carriage frame.
3. Angle the Electronics Carriage so the tabs are at opposite corners of the
Main Enclosure opening.
4. Guide the Electronics Carriage free of the Main Enclosure.
Fig. 8: Side View
CAPTIVE
SCREWS
Summary of Contents for AURORA 45
Page 1: ......
