8
INSTALLATION & TECHNICAL MANUAL
OPENING THE AURORA ENCLOSURE (MOUNTED)
1. Make sure the unit is disconnected from power.
2. Remove the captive screws from the bottom of the enclosure.
3. Slowly, guide the Electronics Carriage out of the Main Enclosure, being
careful to avoid bending any LED leads. Each LED is mounted very close
to the PCB to prevent bending.
4. The Electronics Carriage has tabs on either end that allow it to rest on the
Main Enclosure’s flange when mounted (As seen in Fig. 6 & 7).
MAIN
ENCLOSURE
BOTTOM COVER/
ELECTRONICS
CARRIAGE
DISPLAY BOARDS (2)
CONTROLLER
BOARD
POWER SUPPLY
BOARD
Fig. 6: Front View
Fig. 7: Back View
Summary of Contents for AURORA 45
Page 1: ......
