c) From the front of the rack, latch the front rack mount clip.
Figure 9: Rack Mount Rail—Front
d) Repeat the previous step to connect the other front rack mount clip.
Note: Ensure that the front and rear of the rails are attached to the same U
location.
e) Grasping the inside rail on the rack mount rails, slide the rails until locked in the extended position.
8.3
Installing the Cable Management Assembly
Personnel
Warnings
Required Tools
1
Attention
Ensure the CMA does not bind or
bend. Improper installations could result in damage
to cabling and components.
#2 Phillips-head screwdriver
To install the Cable Management Assembly (CMA), do the following:
1. Install CMA arms onto the rack.
26
8
Installing the 4U60 G2 Storage Enclosure
Installation Guide
8.3
Installing the Cable Management Assembly
