f) Press on the drive carrier lever until there is an audible click. This means the drive is securely locked
into place.
Figure 18: HDD—Install
g) Install the remaining drives in the last row.
h) Continue to populate the drive bay rows, one at a time, until the enclosure reaches the expected capacity.
Attention: If the enclosure will not be fully populated, it is required that the last row that contains
drive must be filled with either drives or drive blanks.
i) Place the cover on top of the chassis and slide towards the rear of the enclosure until fully seated.
Figure 19: Drive Bay Cover—Seated
31
8
Installing the 4U60 G2 Storage Enclosure
Installation Guide
8.5
Installing HDDs into the Chassis
