b) Turn the thumbscrews clockwise until the enclosure is secure.
Figure 22: Chassis—Thumbscrews Clockwise
8.6
Installing the Network Cables
Personnel
Warnings
Required Tools
1
Disconnect cabling before
servicing.
None
To install the Network Cables, do the following:
1. Run the cable through the CMA arm.
2. Connect the cable to the customer network.
3. Connect the network cable to the ESM management port.
4. Connect the power cord to the PSU power port.
5. Attach the clip that secures the power cord to the PSU.
Figure 23: Clip Closed
6. Connect the clip that secures the power cord to the PSU.
33
8
Installing the 4U60 G2 Storage Enclosure
Installation Guide
8.6
Installing the Network Cables
