Western Digital H4060-J, Installation Manual

Page: 2 / 70

Installation Guide Revision History
Revision History
Date Revision Comment
November 2017 Revision 1.0 Initial Release
November 2017 Revision 1.1
•
The crossbar on the CMA was changed. See the installation
instructions for details.
•
Changed required rack depth, see Required Rack Depth (page
5) .
• Changed typical power consumption, see Typical Power
Consumption (page 4) .
December 2017 Revision 1.2
• Added active cable support
•
Added a note regarding single IOMs in SATA TLAs. See
Ultrastar Data60 Description (page 2)
•
Updated the Non-Op altitude specification. See Non-
Operational Altitude (page 4) .
•
Correct the packaging images to show the two CMA boxes
that come in the accessory tray. See Packaging Layout (page
32) .
January 2018 Revision 1.2.1 Updated the product name
January 2018 Revision 1.2.2 Added an image for cage nut positioning in the installation
procedure.
January 2018 Revision 1.3
•
Updated information on the 2.5" drive carrier option. (topic
removed)
•
Added torque requirements for all screws used in the
enclosure.
•
Updated the IOM replacement section to account for the
possibility of a firmware mismatch. (topic removed)
•
Updated the drive assembly installation instructions to clarify
the orientation of the drive assemblies. See Ultrastar Data60
Installation Procedure (page 39) .
April 2018 Revision 1.4
•
Updated Compatible Drives List. See List of Compatible Drives
(page 9) .
• Updated the Rack Requirements. See Ultrastar Data60 Rack
Requirements (page 5) .
June 2018 Revision 1.5
• Updated the Compatible Drives List. See List of Compatible
Drives (page 9)
December 2018 Revision 1.6
•
Updated Compatible Drives List. See List of Compatible Drives
(page 9)
i