Installation Guide
1. Overview
1.1 Ultrastar ® Data60 Description
1.1
Ultrastar® Data60 Description
Figure 2:
Ultrastar Data60
The Ultrastar® Data60 is a 4U form factor, high availability, high density, rack-mounted storage enclosure
that is capable of hosting up to 60 SAS or SATA drives. The maximum data storage capacity of the
Ultrastar Data60 is 840 TB using 14TB Ultrastar® HC530 drives . (For a full list of compatible drives and total
.) The enclosure runs on an input voltage of 200 - 240 VAC and
consumes ~1000W of power under typical conditions. It requires a maximum of ~1250W at full load.
It is designed to fit within a 4U rack space and requires 900mm (35.43in.) usable rack space, frame to frame.
A fully loaded system will add 79.4 kg. / 175 lbs. of static load when fully loaded with drives.
•
4U Storage Enclosure
•
Supports up to 60 Drives
•
Can support 3.5” drives and 2.5” SSD drives (2.5" requires an adapter) in the 60 available drive bays.
•
Up to 12W per drive slot for the 60 data storage drives (Cannot exceed 85A on the 5V rail)
•
House and control four (4) N+1 redundant 80mm rear fans
•
House and control a dual rotor 40mm internal IOM Fan
•
Controlled by two (2) redundant I/O Modules
•
Powered by two (2) redundant 1600W PSUs
•
Full high availability with independent dual paths to all HDDs
•
Toolless replacement of all Customer Replaceable Units (CRUs)
•
Fits within a standard EIA-310 rack including all necessary cable management (see:
)
•
Supports up to 3m passive SAS cables (limited to 3m or less) or active cables (any length)
•
Supports High line (220-240 VAC) Input Power
1.2
Ultrastar Data60 Layout
* SATA based models will only include 1 IOM
2
