68
6623-3201
5.2.1 Accessing unit services from the wireless
port or VPN tunnels
The
External Access
table on the
Access Control
page is shown
in
Figure 53
. It controls which services can be accessed from
the wireless port and VPN tunnels. By default, the unit will
block all requests received on the wireless port and allow all
requests received from VPN tunnels.
There are several modes for determining which services can
be accessed:
No access
All incoming requests are dropped. Set the Default policy set
to
Deny
and check
no
boxes in the Allow column.
Restricted access
Incoming requests for particular services will be allowed.
Set the Default policy to
Deny
and check the boxes for the
desired services in the Allow column.
Full access
All incoming requests allowed. Set the Default policy to
Allow
.
To change the port number that a service is received on,
change the entry in the Port column for the given service. For
example, to change the web server to port 8080 on the wire-
less port, enter
8080
in the WLS column on the Web Server
row.
Summary of Contents for MRD-310
