56
6623-3201
4 Network
This section describes the confiuration of the Network or
LAN settings. This includes setting the IP Address of the MRD-
3xx Unit, configuring the DHCP server and the DNS settings.
4.1 LAN Interface
The LAN Interface refers to the two switched Ethernet ports
located on the front of the MRD-3xx. To access the LAN
Interface settings select the
Network
tab from the main menu
then the
LAN
tab from the sub-menu.
4.1.1 Changing the IP Settings of the LAN
Interface
The LAN IP address is the address used to access the MRD-
3xx via the LAN (Ethernet) interface. The default IP settings of
the MRD-3xx Unit / Router are:
IP Address: 192.168.2.200
•
Netmask: 255.255.255.0
•
The Network settings are contained on the
Network / LAN
page under the
Interface Configuration
heading. To change the IP
settings :
1. Click the
Network
tab on the main menu, this will display the
LAN
page as shown in
Figure 47
, the LAN interface settings are
in the section titled Interface Configuration.
2. Ensure that Enabled is set to
Yes
.
3. Enter the IP address in the
IP Address box
.
4. Enter the Netmask in the
Netmask
box, to that of the sub-
net to which the unit is connected.
5. Click the
Update
button at the bottom of the page to com-
mit the changes.
Summary of Contents for MRD-310
