Westermann Cleanmeleon ll, Operating Instructions And Spare Parts List

Page: 38 / 62

Westermann Cleanmeleon II Westermann GmbH & Co. KG
34
7.2. Tighten V-belt
Loosen the nuts on
the engine holding
plate on both sides
of the device and
push back via the
groove in the frame
using a screwdriver.
The V-belt must be able to press in another 0.5 - 1 cm
7.3. Lubrication
The bearing for the steering
is located on the rear wheel
mounting.
To grease the bearings in
the
drive wheels, the
wheels must be dismantled.
Nut
Groove
Grease fitting