Westen quasar D, Operating And Installation Instructions

Page: 46 / 188

46
926.275.1 - GB
INSTRUCTIONS FOR FITTERS
21. PARAMETERS SETTING
To set the boiler parameters press the (
–
) and (
–
) buttons together for at least 6 seconds. When the function is
active, the letters “F01” will appear on the display, alternating with the value of the parameter shown.
Changing the parameters
• Press the (
+/–
) buttons to scroll through the parameters;
• Press the (
+/–
) buttons to change each parameter value;
• Press the button ( ) to save changes, the display shows “MEM”;
• Press the button (
i
) to leave the function without saving, the display shows “ ESC ”;
Description of parameters
Factory settings
24 F 24
F01
Type of boiler
10
= sealed chamber -
20
= atmospheric chamber
10 20
F02
Gas used
00 = NATURAL (METHANE) - 01 = LPG
00 o 01
F03 Hydraulic system 02
F04/ F05
Setting programmable relays 1 and 2 (See SERVICE instructions)
00
= no associated function
00
F06
Maximum temperature setpoint setting (°C)
00 = 85°C - 01 = 45°C
00
F07
Configuration DHW priority input 02
F08 Max heating power (0-100%) 100
F09 Max DHW power (0-100%) 100
F10
Min heating power
(0-100%)
00
F11
Waiting time in heating before a new ignition
(00-10 minutes) - 00=10 seconds
03
F12 Diagnostics (See SERVICE Instructions) --
F13
Type of exchanger
00
= 275 mm
01 = 225 mm
01 00
F14
Testing the correct position of the DHW probe
00 = Disable
01 = Enable
01