030-300198 Rev. D
69
March 2003
WireSpeed Dual Connect NAT Router
User Guide
If you want to save your new firewall settings, click on
save
in the screen labeled
User Define Firewall Rules
.
NOTE
: Westell recommends that you do not change the settings in the
User Defined Firewall Rules
screen. If you
need to reset the Router to factory default settings, push the reset button on the rear of the Router.
If you clicked
save
in the
User Define Firewall Rules
screen, the following pop-up screen will be displayed. Click
OK
when asked
Do you wish to save these Rules to Flash and switch you Security Level to “User”?
This will
save your new firewall settings.
If you click
Cancel
, your new firewall settings will not be saved.
The information in this screen depends
on the level of security you have selected.
