030-300198 Rev. D
49
March 2003
WireSpeed Dual Connect NAT Router
User Guide
DHCP Lease Time
Factory Default = 01:00:00:00
Displays the amount of time the provided addresses will be valid, after which
the DHCP client will usually re-submit a request.
NOTE: DHCP Lease Time is displayed in the format (dd:hh:mm:ss)*. (This
value must be greater than 10 seconds.) The default = 01:00:00:00. Seconds
must be between 0 and 59, minutes must be between 0 and 59, and hours must
be between 0 and 23.
*(dd = days, hh = hours, mm = minutes, ss = seconds)
Disabling the DHCP Server
If you click on the pull-down arrow at
DHCP Server:,
a list of options will be displayed. If you want to disable
your DHCP server, select
Off
from the
DHCP Server
pull-down arrow (see the screen below). The next screen will
be displayed immediately.
If you selected
Off
at
DHCP Server:,
the following screen will be displayed immediately. Click on
save
to save the
DHCP Server
setting. Click on
save.
