6
PANEL DESCRIPTION
continued
FRONT PANEL continued
- “cw” LED – This Red LED indicates when CW keying is active with appropriate software for CW keying. This
LED may be on with the
RIGblaster pro
turned off if the serial port to the computer is connected and the DTR line
of that serial port is active.
- “fsk” LED – This Red LED blinks when FSK keying is active with appropriate software for FSK keying. Under
certain conditions, this LED may be on without an active FSK program running in the computer if the serial port to
the computer is connected and the TXD line of that serial port is in an up state. This condition can also occur with
some USB to serial port converters.
- “power” SWITCH – Turns power ON and OFF. Up is ON and down is OFF.
- “power” LED – a Green LED indicating the
RIGblaster pro
is turned on.
