23
jack on the rear of the
RIGblaster pro
. The other end plugs into the Mic In jack on the Computer
Sound Card. See the section “MIC MODE JUMPER – P6” later in this manual and STEP 9 -
ADVANCED AUDIO PROCESSING CONSIDERATIONS, earlier in this manual, for more
information on using your radio mic on your computer.
- This wire connects the Computer Speakers to the
RIGblaster pro
. One end plugs into the
SPKR OUT (R8) jack on the rear of the
RIGblaster pro
. The other end remains as it was before,
that is, connected to the Computer Speakers.
- This is a mini plug Patch Cord that connects the Computer Sound Card - Line Out to the
RIGblaster pro
. One end plugs into the LINE IN (R9) jack on the rear of the
RIGblaster pro
.
The other end plugs into the Line Out jack on the Computer Sound Card.
- This is a mini plug Patch Cord that connects the Computer Sound Card - Line In to the
RIGblaster pro
. One end plugs into the LINE OUT (R10) jack on the rear of the
RIGblaster pro
.
The other end plugs into the Line In jack on the Computer Sound Card.
- This is a mini plug Patch Cord that routes receive audio from the Radio to the
RIGblaster
pro
. It provides half the path for DC isolated audio from the radio to the computer. One end
plugs into the AUDIO IN (R11) jack on the rear of the
RIGblaster pro
. The other end plugs into
the EXTERNAL SPEAKER JACK [EXT SP] on the transceiver.
- This wire connects the Radio External Speaker to the
RIGblaster pro
. One end plugs into
the SPKR OUT (R12) jack on the rear of the
RIGblaster pro
. The other end remains as it was
before, that is, connected to the Radio External Speaker.
- This is the Microphone Cable (supplied with the
RIGblaster pro
) that connects the
RIGblaster pro
to the Microphone Input jack of the transceiver. The end with the RJ45
connector plugs into the MIC OUT (R15) jack on the rear of the
RIGblaster pro
. The end with
the standard 8-pin Screw on Mic Connector plugs into the MICROPHONE CONNECTOR
[MIC] jack on the transceiver.
- This wire, from the Power Supply (supplied with the
RIGblaster pro
), provides power for
the
RIGblaster pro
. It plugs into the POWER 12VDC (R1) jack on the rear of the
RIGblaster
pro
.
- This wire connects an existing PTT Foot Switch to the
RIGblaster pro
. It plugs into the
PTT IN- RCA Phono Jack (R14) on the rear of the
RIGblaster pro
.
